[Run Train (Rail / Station / Train)] TOP PAGE
≪Lay Railroad Tracks Under the Ground Speed Limiting Function≫
Construct Special Bridge
【Truss Railroad Bridge】 Used for new lines and reconstruction. Steel structures on the upper part disperse the weight on bridge girders.
【Arch Railroad Bridge】 Brick-build bridge that is common for traditional local line and mostly built with low height.
【Trestle Railroad Bridge】 Bridge girder imported from the U.S. in the Meiji Era. Suitable for higher and longer bridges as its steel structure is robust. If the level is higher than 4, its shape cannot be wider towards the bottom.
【Miniature Railroad Bridge】 Arched miniature truss bridge for model railroad. More photogenic if used with Diorama mode.
Construct Bridge
Open the [Rail] menu and select [Track]. Press × button / left click any bridge from [Truss], [Arch], [Trestle] and [Mini Truss] to check and construct. To construct a bridge on water, select [Height] in the settings of the height bar. > Hover the cursor over the height gauge. > Press × button and the up or down directional buttons / left click / use the scroll wheel to set the height lower than 0m. Note:　If you lay trucks with a height of 0m, you will not be able to construct a bridge and normal railroad track will be laid on the ground. 【Open Height Bar】 To open the height bar, select the second right icon and press × button / left click. While laying tracks, press □ button or [Ctrl] to open the height bar.
Construct Bridge on the Ground
Check any bridge from [Truss Railroad Bridge], [Arch Railroad Bridge], [Trestle Railroad Bridge] and [Miniature Railroad Bridge] that you are going to construct, and then check [Bridge Always]. Keep checked and lay tracks to construct a bridge on the ground. Note: Usual railroad track is laid if the height level is 0m.
Published by STUDIOARTDINK. © 2010-2020 ARTDINK. All Rights Reserved. *Please enable JavaScript in your browser to view all content on this site.